PRB08025

Key Features:

Efficiently designed jet pump

Self-Righting Hull

High Impact Blow Molded ABS Hull

Locking High Impact canopy

Durable composite impeller

Solid drive shaft with liner

Dynamite® 90 AMP ESC 2-4S Compatible

Powerful out-runner motor

Auminum/water cooled motor mount

Stainless steel hardware

2.4GHz radio system

Styrofoam flotation

Foam canopy seal

Boat stand

Trim adjustment servo option

Needed to Complete:

(1) 5000 mAh 11.1V 3S 30C LiPo Battery with EC3 Connector

(1) Charger

(4) AA Batteries

What's in the box?

(1) River Jet Boat

(1) Radio System

(1) User Manual

Overview:

There's nothing like riding in a full-scale jet boat, from jumping waves to darting across the lake. Jet boats can change direction in a heartbeat, providing thrill ride after thrill ride. The 23-inch RTR Deep-V River Jet Boat lets you cruise anywhere-including through rapids and moving water. The jet boat doesn't have an exposed propeller, turn fins or rudder. And with its powerful propulsion system, this boat can run in minimal amounts of water-even just a few inches. Thanks to its self-righting feature, the boat flips back over in a matter of seconds by activating the throttle. So whether you're new to RC boating or an experienced captain, you're sure to have a blast jumping rapids and running upstream.

Extreme power

The efficiently designed jet pump provides maximum propulsion and expert handling.

Self-righting hull

Thanks to the boat's self-righting feature, it flips back over in a matter of seconds by activating the throttle. Now you can drive in moving water without the fear of losing your boat.

Run-anywhere flexibility

The high-impact, blow-molded hull lets you bounce off rocks without worrying about cracking the hull.

Interference-free connection

The included Spektrum™ STX2™ 2.4GHz FHSS transmitter provides a clear, precise connection while the boat is on the water.

Locking high-impact canopy

Made of the same material as the hull, the canopy is attached by four thumb screws. High dense foam between the hull and canopy keeps water out of the hull and ensures your electronics stay dry.

Trim adjustment servo option

Note: This option is not available with the included radio system. Trim adjustment requires a 3-channel radio and receiver and a 1/18-scale or 1/16 scale size servo with stainless steel 3mm mounting screws (we do not carry the stainless steel 3mm mounting screws separately).