BT75MD

Meteor75, a better approach to the 75mm micro drone which features high KV motors - 1102 18000KV motors & BT2.0 450mAH battery, giving pilots plenty of power to use both indoor and outdoor spaces as a small scale acro playground.

Features:

Meteor75 is the first generation whoop powered by a brand-new BT2.0 connector 450mAh battery. The BT2.0 connector effectively decreases internal connector resistance for a much better discharge performance compare with the initial PH2.0 connector

The power system uses the latest 1102 18000KV motors and 40mm 3-blade props, which provides pilots a stronger experience of a powerful indoor and outdoor flight

1102-18000KV motors paired with durable ball bearings for increasing flight time/performance and low maintenance, while it adopts PCB connector to allow you repair it easier once it's disconnected

Flight controller pre-soldered the BT2.0 cable, which can provide a more stable and powerful 9A continuous current

Comes with an injection molding canopy, more durable, and weighs only 1.5g

The package comes with BT2.0 450mAh 1S lipo and BT2.0-PH2.0 adapter cable. The adapter cable is convenient for charging the BT2.0 battery with your stock PH2.0 charger. Meanwhile, we have also released BT2.0 Lipo Charger Board to charge 6pcs battery at the same time

Specifications:

FC&ESC: F4 1-2S AIO Brushless FC

Frame: Meteor75 V2 Brushless Frame

Motors: 1102 18000KV motor

Props: 40mm 3-Blade Propellers (1.5mm Shaft)

VTX&Camera: M01 AIO Camera VTX

Receiver Option: DSMX

Battery: BT2.0 450mAh 1S 30C Battery

Flight time: 3-4min

Weight: 28.7g (without battery)

F4 1-2S AIO Brushless FC 

The burst current of the Meteor75 could up to 15A even on 1S power. Only the F4 1-2S FC board could hold so high a current in continue flying. Of course, the 1g difference in weight is no sense to such a beast drone.

This AIO F4 FC is suitable for a light 1-2S whoop drone perfectly, Integrated with a Betaflight F411 processor FC, Betaflight OSD, SPI Frsky receiver, and 1-2S 5A ESC.

CPU: STM32F411

Six-Axis: MPU6000

Built-in 1-2S ESC with 5A continuous and peak 6A current

Support BLHeliSuite programmable

Factory firmware: S_H_50_REV16_7.HEX

Includes: