AHNRH55E18

• T-Rex 550X Dominator
• Equipped with the low CG EFL rotor head, for exhilarating 3D performance and unimaginable flight speed.
• Designed with direct servo CCPM control, and a single piece main bearing block with integrated servo mounts similar to that of T-Rex 700L, for simplified servo installation and clean aesthetic.
• Updated swash anti-rotation guide with embedded anti-wear material, effectively minimize the wear between swashplate long ball and guide.
• Innovative sliding battery tray rails imbedded into the 3K side frames, with patented spring loaded latching mechanism, allowing for quick battery access as well as battery protection.
• Carbon side frame plates utilized composite material integration technology, adding battery mounting rails. The clever use of open spaces within the frame resulting in a structure that is both rigid and aesthetically pleasing.
• High quality tail gearbox design, combined with dual point mounted tail pitch control assembly to minimize slops and increase rudder control precision.

BeastX Plus Features: 

• Servo center pulses:
• Swashplate: 1520µs
• Rudder: 1520µs, 960µs, 760µs
• Servo pulse rates:
• Swashplate: 50 - 200Hz
• Rudder: 50 - 560Hz
• Swashplate mixing:
• mCCPM, eCCPM: 90, 120, 135, 140
• Swash phasing adjustment (Via BeastX USB BTXA76007 and StudioX)
• Input signals:
• Single channels
• PPM serial pulse
• SRXL (JR XBus, SUMD, M-Link)
• Futaba S.Bus/S.Bus2
• Spektrum Remote Receiver (DSM2/DSMX - with BeastX Adapter BTXA76009)

• 550X Dominator:
• Length: 1163mm
• Height: 344mm
• Width: 196mm
• Main Blade Length: 550mm
• Main Rotor Diameter: 1248mm
• Tail Rotor Diameter: 254mm
• Motor Drive Gear: 16T
• Main Drive Gear: 112T
• Autorotation Tail Drive Gear: 131T
• Tail Drive Gear: 34T
• Drive Gear Ratio: 7:1:3.85
• Weight (w/o power system): 2590g 
  
  
• BeastX PLUS Specifications: 
• Input Voltage: 3.5V-8.5V DC (operation with 2 cell LiPo is possible)
• Processor: 32 Bit ARM
• Sensor: 6-Axis MEMS (Gyro+Accelerometer)
• Dimensions: 36x25x14mm
• Weight (w/o wires): 11g

• (1) T-REX 550X DOMINATOR Kit
• (1) 550 Carbon Fiber Blade set
• (1) 90mm Carbon Fiber Tail Blade set
• (1) 730MX Brushless Motor(960KV)
• (3) DS820M High Voltage Brushless servo
• (1) DS825M High Voltage Brushless servo
• (1) Align RCE-BL100A Brushless ESC 
  
• (1) Microbeast PLUS Flybarless System

• Transmitter (6-channel or more,helicopter system)
• Receiver (6-channel or more)
• Pitch gauge or Digital Pitch Gauge
• 6S Li-Po 2600~5200mAh battery & Charger